page 3
1. Screw the wall mount (B) to a flat,
vertical surface by drilling two holes and
inserting the wall anchors. Then align
the wall anchors with the holes on the
wall mount plate and twist the screws in
to hold in place. (Fig. 4).
2. Simply slide the fixture (A) down onto
the grooves on the wall mount (Fig. 5).
1. Remove part (A) from part (B) by
screwing in Fig. 1.
2. Screw in provided A50WW10W Gama Sonic
bulb while gripping the base only (Fig. 2).
WARNING: GAMA SONIC
®
Light bulbs are not
to be used in other electrical sockets these
are low-voltage light bulbs that are built and
designed for our products only.
3. Reattach part (A) to part (B). Turn the
operation switch (Fig. 3) to the LOW or
HIGH position, and the solar lamp will
automatically operate from dusk to dawn.
Operation Instructions
Installation Instructions
Fig. 2
Fig. 3
OPERATION SWITCH
Fig. 1
A
B
Fig. 4
Fig. 5
B.
A.
LOW OFF HIGH
I O II
