Place of fuel refilling.
Location:
on the fuel tank cover
.
OHV
Indication of engine of top valve arrangement.
Location:
on the cover of the valve mechanism
OHC
Indication of engine of top shaft arrangement
Elhelyezés:
on the cover of the valve
mechanism
.
ATTENTION:
Hot surface!
Location:
on the cover of the exhaust silencer
.
START
Location:
on the handle of the pull cord.
During work performance wear protective clothing,
secure footgear, goggles and gloves
.
Do not refill the cultivator fuel tank while operating.
Petrol is allowed to be refilled only outdoors
.
Perform the work far away from open flames and
sparks and avoid smoking
.
Do not touch the rotary blades of the cultivator by your
hand, foot or even your clothing. The cultivator motor,
exhaust silencer and reducer will warm up during the
work performance and cool down continually
.
The engine can be stopped in the following cases
:
When the work performance with the cultivator is
finished
;
During maintenance and adjustment operations
;
When the cultivator is relocated from a working site
to another
Store the cultivator and the petrol in a place unreachable
for children and at a safe distance from sparks, fire and
radiators
.
Prior to locating the cultivator in a closed room for
permanent storage, wait for the motor to cool down
entirely
.
The parts must be in compliance with the
manufacturer’s specifications. Use only original parts.
The cultivator may be repaired only by an authorised
service repair shop
.
Safety engineering devices
Safety engineering devices protect the user from injuries
possibly occurring during the work performance therefore they
should always be in operable condition.
Do not change or block the operation of the safety engineering
devices in any way.
Clutch lever
When the clutch lever is released, the cultivator rotary blades
will stop
.
Starter switch
If the starter switch is turned
“OFF” (“turned off”) position then the
engine will stop.
Guard
It will protect the user from injuries caused by pieces of soil
flying out from under the cultivator rotary blades
.
Handlebar cross-tube
It will ensure the distance between the user and the cultivator
rotary blades
.
Belt transmission guard
It covers the V-belt during the operation of the cultivator.
Information on the cultivator
For ensuring safe operation and maintenance of the
cultivator, each symbol can be seen on the device in the form
of die stamped or projected picture.
Stickers of operations to be done by the
controls
Depending on the engine model, stickers and their arrangement
may differ from those included in the instruction manual.
Air valve control
To the left
–“Fully closed”
To the right
–“Fully open”
Fuel cock
To the right
–“Open”. To the left –“Closed”.
Location:
on the carburettor case
RH
F
1
F
2
Speed changer speeds
RH
– reverse.
1, 2
– first/second speed. F – coast.
Location:
on the speed changer
I / ON
0 / OFF
Starter switch
Location:
on the engine case.
Butterfly valve control.
“Rabbit”/
-
Max
revolution
.
“Turtle”/
- Min
revolution
.
Location:
on the engine case.
Warning symbols
There is a sticker containing warning symbols on the
cultivator guard. Prior to starting the operation, get acquainted
with these warnings and apply them during your work
.
Prior to starting to use the cultivator, read the
instruction manual, but mainly the section "For
your safety".
Risk of injury by the rotary blades
Keep your hand and feet away at a safe
distance from the rotary blades
.
Risk of injury or risk of damaging the objects
found nearby. Make sure that all unauthorised
persons, including children and domestic animals
are staying out of the efficiency range of the
cultivator
.
Risk of injury by objects flying out from under
the cultivator.
DO NOT
WORK WITHOUT
THE GUARD BEING INSTALLED.
Prior to performing the cultivator maintenance,
remove the cap of the high voltage line from the
spark-plug of the motor
.
Symbols found in the instruction manual
The following symbols are found in the instruction manual
:
Danger!
It draws the us
er’s attention to such sources of
danger which may cause injury to the user
during the work
performance with the cultivator
.
Warning!
It draws the attention to such sources of danger which may
cause damage to the cultivator in case of improper use
.
3
