background image

RFR12VPRWP

Instruction Manual

WWW.GAMAINC.COM

Included in this Kit:
(1) RFR12VPRWP Receiver
(1) 3-Button Transmitter 

*Image shown with standard transmitter*

- Clear Protective Transmitter Pouch ZLB-67

Available accessories:
- Standard Transmitter P44066 

- 6-Pack of Replacement A-23 12V Batteries for
   Transmitter A23-6

This receiver is a 340 MHz polarity reversing remote control.  It is intended to be used in conjunction with the KF340-3 
Transmitter.   The receiver can be configured for either momentary or latching operation.  The unit operates from 12VDC 
and provides a 12VDC polarity reversing output. A third auxiliary relay provides a contact closure. All of the electronic 
components are encapsulated so the receiver is capable of being operated in harsh environments.  

Operating Temperature Range:

   0°F to 160°F 

Maximum Ratings:

  Power for the receiver can be in the range of 10VDC to 15VDC.  It is recommended that a 12V deep 

cycle marine battery be used to power the receiver.  The receiver is reverse polarity protected.   

Power Consumption: 

 10 Milliamperes when the relay is de-energized.  45 Milliamperes when the relay is energized. 

Input/output Connections: 

 12VDC input power connects to the terminals marked “12V” and "GND" on the top panel of 

the receiver.  The two white wires provide a set of dry contact closures using the ON/OFF switch position on the 
transmitter. 

Dimensions:

  Receiver dimensions are 5.0"W x 5.0"D x 1.5"H.  The receiver weighs 1.0 lb. 

Dip Switch:

Switches Up= Latching Mode 
Switches Down= Momentary Mode

Turning any of the 4 DIP switches to the On position enables the corresponding latching function. Pressing the transmitter 
button once will energize the relay output. Pressing the same button a second time will de-energize the relay output. If the 
DIP switches are in the Off position, the corresponding relay will have a momentary function. In this mode, the relays are 
energized for as long as the transmitter button is depressed. Momentary and latching functions can be intermixed as 
desired

Page 1 REV A 06/17/20

- Waterproof Transmitter KF340-3WP 
- Rechargeable Transmitter GKF-WPTX-3 
- Long Range Antenna LRA-340
- Waterproof Enclosure GWE-663-812

1 2 3 4

O

F
F

Summary of Contents for RFR12VPRWP

Page 1: ...is reverse polarity protected Power Consumption 10 Milliamperes when the relay is de energized 45 Milliamperes when the relay is energized Input output Connections 12VDC input power connects to the terminals marked 12V and GND on the top panel of the receiver The two white wires provide a set of dry contact closures using the ON OFF switch position on the transmitter Dimensions Receiver dimensions...

Page 2: ... program mode Release the button At this point all previously programmed transmitter addresses are erased from the receiver s memory 2 Press and release any button on the transmitter and verify that the red program LED extinguishes and then illuminates blinks once 3 Repeat previous step for additional transmitters that will operate with this particular receiver The red LED on the receiver will ext...

Page 3: ...long range option is purchased with the system this modification will be made prior to shipment To add long range functionality 1 Plug long range antenna Part number LRA 340 into the long range antenna jack 2 Clip the Long Range Antenna Bypass Wire This will deactivate the internal antenna NOTE It is recommended that you cover the exposed wires with RTV silicone sealant NOTE ONCE THE LONG RANGE MO...

Page 4: ...ntrol should be within this range 3 Reprogram the remote control If the system is non functional try to reprogram the remote control The program may not have taken during the programming process or the program button may have been pressed If the program button is pressed the memory of the remote controls programed to the receiver are erased 4 Listen and look for functionality on the receiver The L...

Reviews: