GAMA Electronics RF24V1C Instruction Manual Download Page 3

WWW.GAMAINC.COM

Page 3 REV A 07/07/20

To Add Long Range Functionality

The remote control system is equipped with an internal antenna. The expected range in normal conditions is 
approximately 100 feet. When additional range is needed, or if the control is placed locations adverse to RF signal 
reception, a long range antenna can be added to the system. GAMA Electronics long range antenna, part number LRA-
340, replaces the internal antenna on the system. In normal operating conditions expected range is greater than 500 feet. 
If the long range option is purchased with the system, this modification will be made prior to shipment.

To add long range functionality:

1. Plug long range antenna (Part number LRA-340) into the long range antenna jack.

2. Clip the Long Range Antenna Bypass Wire (This will deactivate the internal antenna)

NOTE: It is recommended that you cover the exposed wires with RTV silicone sealant.

NOTE: ONCE THE LONG RANGE MODIFICATIONS HAVE BEEN MADE TO THE SYSTEM THEY CANNOT 
BE REVERSED.

Wiring Diagram

RF24V1C

Instruction Manual

PROGRAM

NC

COM

NO

RFR12V1C

GAMAINC.COM

24V DC POWER

SOURCE

Isolated Output Contacts - Independent from the power source

NC - Normally Closed Contact

This terminal is connected to the common  

until the receiver is activated by the transmitter
COM-Common

This terminal should be connected to the AC or DC

power that is being switched.
NO - Normally Open Contact 

This terminal is connected to the common  

when the receiver is activated by the transmitter

Insert Long Range Antenna Here

Program Switch

Reviews: