14
-
Ed.
1/2012 Rev.0
ENG
Make the connection following the provided technical manners, respecting both the
cyclic sequence of phases of connection, and the color coding of conductors.
2.4 Preliminary installation requirements
Install the machine only after you have checked that:
the voltage indicated on the plate is the voltage the machine will be supplied
with;
the voltage and absorbed power characteristics of each machine model (Sec.
1.4) are suitable for the available voltage and power;
the distribution system has an effective earthing system and safety switch.
All the components and materials necessary to perform the installation must: be done in full
compliance with the laws in force and abide by the dictates of the low voltage directive and
the electromagnetic compatibility directive in force.
2.4.1 Technical information reserved to the qualified installer
Protection against overcurrent and differential protection must be installed
upstream of the connected equipment by the user.
Keep in perfect condition and adequately protect against any
damage the cable, the plug connection of the oven and all protective
equipment and isolation of the power distribution box of the oven
itself.
