Revision 4, 7 February 2017, Page
1
of
3
Product Installation Guideline
SHWR-DV-01 (50140)
SPECIFICATIONS
This product has a unique design concept that eliminates the institutional look and provides
anti-ligature features and vandal resistant compliance
The paddle design handle allows the diverter to be activated with minimal effort.
170mm round face plate with polished stainless steel finish for a homely look, but is able to
withstand heavy knocks
Bevelled edges for maximum tight fixing
This item is designed for panel wall installation (wall thickness up to 20mm).
TECHNICAL DATA
Inlet connections (BSP Female)
1
/2”
Working Pressure Range (kPa)
Min
50
Max 500
Maximum Working Temperature (°C)
41
NOTE:
As the Galvin Specialised Design and Development team continually strive to improve our products, specifications may change without
notice.
PRE-INSTALLATION
MOUNTING DETAILS
– HOLE CENTRES
Suitable for panel wall mounting
Mark & drill
5.5mm &
58-60mm holes as shown
Tools required: Power drill, spanner or adjustable cresent and hex key.
