5.
Fit the handle
Fit the nylon insert and handle, ensuring the arrow on the
handle matches the lines on the faceplate when rotated.
Secure the handle with supplied tamper proof screw.
6. Testing
Once fitted all parts & connected with
controller, test body for leaks and correct
operation.
TROUBLESHOOTING
PROBLEM
CAUSE
RECTIFICATION
Faceplate does not sit flush on
wall
Diverter not mounted
perpendicular to wall
Remove and re-mount so the body is
perpendicular to finshed wall
Water flow does not match
faceplate markings
Handle not aligned correctly
to faceplate
Remove handle and rotate on the spline
until handle matches faceplate. Re-tighten
Outlet on body not connected
to the correct service outlet
Change outlet connection on body
SERVICE AND MAINTENANCE
1. Turn off water
Turn off the water supply and turn on the tap
handle to release any pressure in the lines
Disconnect the plug from controller
Disconnect cold, hot and inlet water
connections
2. Remove handle assembly
Unscrew tamper proof screw from handle
Pull out handle assembly from the body