Version 1, 27
th
October 2020 Page
1
of
4
Ezy-Drink
®
CP-BS
Lead Safe™ Remote Push
Button Top Assembly
PRODUCT CODES:
-
170.93.43.00
SPECIFICATIONS
−
Self-closing push button valve
−
Chrome plate finish for easy cleaning and added durability
−
Made from Lead Safe
™
brass
IMPORTANT: The push button has only two modes. Fully open or closed. Therefore, flow restriction
must be fitted preceding the valve bodies to adjust the flow rate to the desired level.
IMPORTANT: All Ezy-Drink
®
remote top assemblies are tested in accordance with AS/NZS 3718 and leave
our premises in good working order.
As ‘lead free’ is not currently defined by low in Australia and New Zealand, we have based our definition of Lead Safe™ on the requirements of s1417 of the USA’s Saf
e Drinking Water Act
(SDWA) and the relevant US standards NSF61 / NSF372. The SDWA defines ‘lead free’ as “not more than a weighted average of 0.2
5% lead when used with respect to the wetted surface of
pipes, pipe fittings, plumbing fittings and fixtures”.
TECHNICAL DATA
Inlet
G 5/8” BSP - Male
Outlet
N/A
Headwork
Push Button
Working Pressure Range (kPa)
Min
50
Max
500
Working Temperature Range (°C)
Min
5
Max
60
Nominal Flow Rate (LPM)
N/A
Finish
Chrome
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without
notice.
TOOLS REQUIRED
−
Spanner or adjustable crescent
−
Screwdriver
−
Hex key (supplied)
