Version 1, 15 June 2020, 2 of 16
2.0
SAFETY
The CliniMix
®
Lead Safe
TM
TMV SS Cabinet Assembly is a high-performance valve designed to give stable and
dependable operation, provided it is installed, commissioned, operated and maintained as per the
recommendations outlined in this manual. It should be noted, however, that this valve should not be considered
as an alternative to adequate supervision and duty of care during its use and operation.
Note: The mixing valve, inlet controls, pipe work and the surrounding area may become hot when
installed which may cause burn injuries. Precautions should be taken to ensure that these surfaces
cannot cause such injuries.
3.0
DESCRIPTION
This manual covers the CliniMix
®
Lead Safe
TM
TMV SS Cabinet Assembly with Universal Door 20 Bottom In
& Out. These are designed to provide tempered water to the desired outlets. This mixing valve cabinet
assembly is supplied with integral isolating valves, strainers and check valves and is provided with a facility
for thermal disinfecting of the cold inlet side and mixed water outlet.
Avoid using heat for soldering near the mixer inlets to prevent damage to internal components.
4.0
DIMENSIONS
−
Cabinet to suit rough-in wall opening area
310mm width x 310mm height x minimum 75mm
– maximum 105mm depth.
−
Cabinet secured using back mount or side
mount.
−
Measure and mark the cabinet mounting holes
locations at the dimenions shown in below
mounting details image.
−
Suitable fasteners will need to be sourced by the
installer.
BACK MOUNT SIDE MOUNT
