Product Installation Guideline
3. Fit the Touch Button
-
Fit the touch button and coloured washer into the
pre-drilled hole.
NOTE: Ensure the o-ring is between the button
and the coloured washer.
-
Secure using the supplied nut.
4.
Connect the Touch Button to the Controller
-
Connect the controller to the Solenoid
and the battery pack.
OPERATION
1. Turn water on
2. Turn water “OFF”
3. Auto shut “OFF”
SET WATER FLOW DURATION
1. Press button 4x
2. Wait 5 Seconds
3. Turn water ON then OFF
4. Press button 5x
5. Water will run
6. After required flow duration
(2-180 sec) press button again
7. OK
