© Galvin Engineering Pty Ltd
Product Installation Guidelines
Version 1, 19 October 2022, Page
2
of
25
1.0
INTRODUCTION
CliniMix
®
CMV2 Wall Mounted Hands Free Point Use, Proximity Sensor is a high-performance thermostatic
mixing valve suitable for a wide range of applications. The mixing valve has the following features:
−
This point of use thermostatic mixer provides state of the art features to comply with healthcare
requirements.
−
Suitable for high and low water pressure systems.
−
Provides high stability of mixed water temperature even under changing inlets conditions.
−
Ensures rapid shut down of mixed outlet flow in the event of hot or cold water supply failure.
−
Designed for quick and simple in-situ servicing.
−
Suitable for installation into AS3500 compliant systems with hot water temperature as low as 55°C.
−
Smooth internal components and body reduces scale build-up and bacteria growth.
−
Maximum temperature limiter fitted for protection from accidental scalding.
−
Clean smooth lines facilitate fast and easy cleaning.
−
Complies with the requirements of AS 4032.4
– Thermostatic Mixing Valves.
−
Self-draining spout design.
−
Unique hygiene flush feature for in-situ disinfection.
−
Suitable for connection with CliniMix CMM for continuos outlet temperature monitoring.
2.0
SAFETY
CliniMix
®
CMV2 Wall Mounted Hands Free Point Use, Proximity Sensor is a high-performance valve designed
to give stable and dependable operation, provided it is installed, commissioned, operated and maintained as
per the recommendations outlined in this manual. It should be noted however that this valve should not be
considered as an alternative to adequate supervision and duty of care during its use and operation.
3.0
DESCRIPTION
This manual covers the CliniMix
®
CMV2 Wall Mounted Hands Free Point Use, Proximity Sensor mixer. This
product is designed to provide water in a safe temperature for washing. This mixing valve is supplied with
integral isolating valves, strainers, check valves, flow regulators located in-body and a facility for thermal
disinfection of the cold inlet side and mixed water outlet.
Avoid using heat for soldering near the mixer inlets to prevent damage to internal components.
4.0
DIMENSIONS
