ViscoSite VL800 Viscometer
Operating Manual
ViscoSite VL800 Viscometer
Galvanic Applied Sciences, Inc.
Email: [email protected]
Phone: (978) 848--2701
Operating Manual Rev: 2.0E
Toll-Free: 1 (866) 252-8470
Page 68 of 132
Parameter Options
Explanation
Value If
Temperature
Compensated
Viscosity is to
be calculated
compensated viscosity per ASTM
D341.
See Section 5.8.4.
Time Avg
Time Avg
Viscosity
Enabled
(Checkbox
Checked)
With Time averaging enabled, the
calculated ViscoSite viscosity
parameter value is calculated from the
average of the viscosity parameter
readings over a user selected time-
interval (seconds) and displayed. See
Section and the entry later in this
table.
Averaging is performed using data
points collected during the specified
time window. Averaging is then
performed on the next group of data
points collected during the same
interval of time. This is commonly
referred to as “boxcar” averaging.”
Time Avg
Viscosity
Disabled
(Checkbox
Not Checked)
No time averaging is applied to the
ViscoSite viscosity parameter data.
Avg Time
User Entered
Numerical
Time
Averaging
Span
Averaging time (span) for the
viscosity parameter,
expressed in
seconds
.
Table 4.8: Option Submenu Parameters Table (Part 1) with Available
Settings and Functional Descriptions
4.6.2.1 Editing Density, Nom Temp, Time Avg, Avg
Time Option Setup Submenu Parameters
using the Keypad
•
From within the submenu of interest, use the Up/Down
arrow keys to scroll through the parameter list.
•
Press
ENTER
to select the desired parameter.
•
For multiple option parameters, click the desired radio
button. Click on a numeric field to edit.
•
Edit the value using the numbers on the keypad and/or
the Up/Down arrow keys as appropriate.
