Revision 4
36
12/15/2018
4.4.1 Quick Access Toolbar
The
Quick Access Toolbar
(Figure 4-16) includes a number of items that are used for general
purposes.
Figure 4-16: Toolbar
- Accesses a menu that includes
Restore
,
Move
,
Size
,
Maximize,
Minimise
and
Close.
These are standard Windows commands.
- Toggles between
Connect to Analyzer
and
Disconnect from Analyzer
.
This is used
to initiate the log-on process.
- RUN/HALT - When the system is running, pressing the icon will terminate the
operation of the system at the end of the present run. During the time between when the Halt
Button is pressed and the end of the cycle, the analyzer will be in the Halt Pending Mode.
When the system is not running, it will initiate a run.
4.4.2 Toolbar
The
Tools
button immediately below
the Quick Access Toolbar
presents the Toolbar (Figure
4-17).
Figure 4-17: The Ribbon
Summary of Contents for AccuChrome MA2963
