Galvanic Applied Sciences 943-TGX-CE, Operation Manual

Page: 52 / 151

Revision 4 52 April 2020
Figure 26: Online / Offline Mode Toggle
This toggle has the same function on the Analysis 2 panel as it does on the Analysis 1 panel.
Refer to Section 4.3.1 for details.
4.4.2 Concentrations, Air Demand, and Trend Graph
Like the Analysis 1 panel, the Analysis 2 panel displays live concentration values for all
monitored parameters, as well as a trend graph showing recent data trends. Refer to Figure
27.
Figure 27: Data Fields and Trend Graph
Unlike the Analysis 1 panel, the Analysis 2 panel does not show the Sulfur Vapour (Svap)
concentration, but it does show all other concentration values (including CS2 if the analyzer
is configured for this measurement). On the Analysis 2 panel, the largest data fields are for
the percentage concentrations of H2S and SO2, with the COS, CS2 (if present) and Air
Demand fields being smaller in size. The trend graph shown below the H2S and SO2
indicators indicates the recent trend in concentration for all measured parameters displayed
on this panel. The colour of each
component’s trend line matches the colour of that
component’s data field on this panel. The Air Demand, on this panel indicated as Air, does
not have a line on the trend graph on this panel. The trend graph is updated once per second,
with the most recent result being found on the right side of the graph. The x-axis (time) and
y-axis (concentration) ranges of this graph can be adjusted on the
Configuration Panel
Display Sub-panel (refer to Section 4.8.3).
4.4.3 System Operating Parameters
The Analysis 2 panel also displays several important system operating parameters, as
shown in Figure 28.