Galvanic Applied Sciences 943-TGS-CE, Operation Manual

Page: 80 / 158

Revision 5 80 August 2021
Figure 48: Analysis Section - Analysis Page
The Analysis page is divided into 5 sections, each displaying different information.
5.2.1.1 Value Display
The
Value Display
section displays concentration data, calculated analysis data, and
analyzer parameter as described in Table 17.
Table 17: Value Display Parameters
Parameter Description
Air Demand
Present air demand, in % excess air based on currently measured H
2
S and SO
2
concentrations, calculated as per equation in Section 1.1.
H2S Present calculated concentration of H
2
S in percent
SO2 Present calculated concentration of SO
2
in percent
COS Present calculated concentration of COS in percent
CS2
Present calculated concentration of CS
2
in percent
NOTE: CS
2
is an optional measurement. Only analyzers configured with this
option will be capable of measuring CS
2
Sulfur Vapour Present calculated concentration of sulfur vapour in percent
Cell Pressure Present measured pressure inside the sample measurement cell in mmHg
Cell Temperature Present measured concentration of the measurement cell block assembly in °C
Probe Temperature
Present measured temperature of the sample gas exiting the probe in °C
Cabinet Temperature
The present measured temperature of the interior of the analyzer’s control cabinet
in °C.