Galvanic Applied Sciences 943-TGS-CE, Operation Manual

Page: 18 / 158

Revision 5 18 August 2021
A handheld
keypad
is provided for user interface with the analyzer. Operation of the system
with the keypad is described in Section 4. As an alternative, a web based graphical user
interface (GUI) can be used to view and enter information on a remote basis. Operation using
the web GUI is described in Section 5.
1.6 Contents of this Manual
This manual contains the following information:
Section 1
: 943-TGS-CE Tail Gas Analyzer Introduction
presents introductory information
about the analyzer system.
Section 2: Installation describes unpacking the analyzer, installing it in the facility and
interfacing with other devices.
Section 3:
Operation of the System
explains the physical (non-user interface related)
operation of the analyzer.
Section 4:
Local System Control
describes how the user enters data and views system
parameters using the keypad and the local display
Section 5 :
Web-based Graphical User Interface
describes how to operate the analyzer
and edit the analyzer configuration using the web-based graphical user interface.
Section 6 :
Maintenance
describes the various regular maintenance procedures that
should be followed to keep the analyzer functioning normally.
Section 7:
Service
gives some important service procedures that may be necessary to
keep the analyzer in operational condition.
Section 8:
Product Quality Assurance
includes various documentation of the Quality
Assurance that was done at the factory prior to shipping
.
Section 9:
Drawings
gives a variety of generic drawings related to the analyzer system.
Section 10: Spare Parts lists a number of items which may be required to maintain
operation of the analyzer.
Section 11:
Specifications
presents the specifications for the analyzer.
Section 12:
Input / Output Board Configuration
provides information for the testing and
calibration of the various inputs and outputs available on the analyzer’s IO board.