background image

 

ASSEMBLY INSTRUCTIONS

C. 

Antenna Mounting

D

Cup Head Screw Installation

Place the antenna rod on top of the pole and adjust the position 
of the right bracket to the center of the pole. Tighten all bolts.

Install 5/16” cup head set screw and
tighten to the appropriate torque. Lock
the antenna rod using the nylon flange
locking hex nut. Tighten hex nut to 15Nm
(132In*Lbs).

E

Check Torque

After adjustment all loosened bolts
must be tightened with a torque of:

5/16

˝

 - 15Nm (132In*Lbs)

7/16

˝

 - 40Nm (354In*Lbs)

1

˝

 - 150Nm (1328In*Lbs)

DO NOT REUSE LOCKING HEX NUT.
ONLY USE NEW LOCKING HEX NUTS
FOR ANTENNA MOUNTING ADJUSTMENTS.

5/16“ - Nylon Flange

 Lock Nut (2x)

Antenna Rod / 1“  Mount Adapter Rod

5/16“ - Cup Head

 Set  Screw (2x)

w w w . g a l t r o n i c s . c o m

Copyright © 2016 – Galtronics Corporation Ltd.

Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specifi

 cation without prior notice.

Ultra Flat In-Building SISO Antenna [698-960MHz, 1695-2700 MHz]

Electrical Speci

 cations

21-234-03  R

elease Date: 1

6

th

 September, 2016; Revision: S-

4; Patent Pending

  Baylin  TechnOlogies  Company

Model No: 

62-20-09 |

 

 

Mounting instructions outdoor DAS antennas

page 4 of 4

Summary of Contents for 62-20-09

Page 1: ...onics Corporation Ltd Proprietary Information All rights reserved Galtronics reserves the right to modify or amend any antenna or specification without prior notice 21 234 03 Release Date 16 th September 2016 Revision S 4 Patent Pending Baylin TechnOlogies Company Model No 62 20 09 Mounting instructions outdoor DAS antennas page 1 of 4 ...

Page 2: ...ary Information All rights reserved Galtronics reserves the right to modify or amend any antenna or specification without prior notice 21 234 03 Release Date 16 th September 2016 Revision S 4 Patent Pending 7 16 Nut 8 Stopper Plate 2 7 16 X 11 2 Bolt 8 Left Bracket 1 Right Bracket 1 5 16 Nylon Flange Lock Nut 2 5 16 Cup Head Set Screw 2 7 16 Plain Washer 16 7 16 Spring Washer 16 Support Bracket 1 B...

Page 3: ...ength 7 16 X 1 1 2 7 16 X 1 1 2 A Attach support bracket to pole Drill required hole Ø 1 1 through the wooden pole see drawing Attach the support bracket to the wooden pole Our recommendation Use 1 threaded rods and corresponding 1 plain washer spring washers and 1 Nut as shown in the drawings Tighten with a torque of 150Nm 1328 In Lbs Choose threaded rod length according to Table 1 1 1 Plain Wash...

Page 4: ...54In Lbs 1 150Nm 1328In Lbs DO NOT REUSE LOCKING HEX NUT ONLY USE NEW LOCKING HEX NUTS FOR ANTENNA MOUNTING ADJUSTMENTS 5 16 Nylon Flange Lock Nut 2x Antenna Rod 1 Mount Adapter Rod 5 16 Cup Head Set Screw 2x w w w g a l t r o n i c s c o m Copyright 2016 Galtronics Corporation Ltd Proprietary Information All rights reserved Galtronics reserves the right to modify or amend any antenna or specificat...

Reviews: