background image

3

MB² SERIES

T

st

ne

tn

o

C f

el

ba

Warning!

This amplifier is capable of producing high sound

pressure levels. Continued exposure to high SPL’s

can cause dameage to your hearing. Always set

the volume at a safe listening level or use hearing

protection if the unit is operated at higher levels.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

!

!

C A U T I O N :

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE TOP COVER. NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE

                  The lightning flash with arrow

head symbol, within the

equilateral triangle, is

intended to alert the user to the

presence of uninsulated “dangerous voltage”

within the product inclosure that may be of

sufficient magnitude to constitute

a risk of electitric shock to persons

               The exclamation point within an

equilateral triangle, is intended

               to alert the user to the presence

of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

C A U T I O N :

ATTENTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERTED.

POUR EVITER LES CHOCS ELECTRIQUES, INRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE

DE LA PRISE ET POUSER JUSQU’AU FOND.

Table Of Contents 

Safety Information __________________________ 4
Quick Start ________________________________ 5
Front Panel Controls ________________________6
Rear Panel Features _________________________7
Sample Settings  ____________________________8
Sound Tips   ________________________________9
Installation and Maintenance _________________10
Tech Talk   _______________________________ 11
Specifications _____________________________12

*All Features and specifications are subject to change without notice 

Please read the Safety Information section on page 4 and installation
instructions on page 12 before continuing. 

Gallien-Krueger 
2234 Industrial Drive 
Stockton, CA 95206 
phone: 209.234.7300 
fax: 209.234.8420 

email: [email protected] 
internet: www.gallien-krueger.com 

Summary of Contents for MB2 500














Reviews: