4
MB 500
Safety Information
Safety Information
Please read all enclosed safety precautions before
connecting or operating this product.
Verify Line Voltage and Amperage
Your amplifier has been factory configured for use
with the specific line voltage for your location only.
For example, units set to operate within countries that
supply 100-120 volt electrical service are not
compatible with 230-240 volt systems used in other
countries.
120 Volt/60Hz 15 amp circuit for the USA and
Canada.
230 Volt/(50/60Hz) 10 amp circuit for the UK and
Australia.
230 Volt/(50/60Hz) 10 amp circuit for Europe.
100 Volt/50Hz 15 amp circuit for Japan.
220 Volt/50Hz 10 amp circuit for Korea.
Proper AC circuit for all other countries.
Connecting the amplifier to a line with
specifications other than indicated above can create
safety and fire hazard, and may damage the
amplifier. If you have any questions about the
voltage requirements for your specific model, or
about the line voltage in your area, contact your
dealer before plugging the unit into a wall outlet.
Verify AC Circuit Capacity Before Use:
The high power output of your amplifier may
require heavy current draw under full-load
conditions. To insure proper performance and
avoid potential safety hazards, we recommend
connection to line circuits with amperage specified
“as above”. Connecting to the same circuit used
by other heavy-power devices, such as
high-wattage lights, may cause circuit breakers to
trip. It is always a good idea to avoid using any audio
equipment on the same AC circuit as equipment with
motors, such as air conditioners or refrigerators. This
will lessen the possibility of power variation and
electrical start-up noise affecting your sound.
Please refer to page 10 for more
instructions concerning installation.
AC Power Cord:
To avoid safety hazards, use only the power cord
supplied with your unit. If a replacement cord is
needed, make certain to use a standard IEC
compliant cord. Damaged power cords should be
replaced immediately. When setting up, make
certain that the AC plug is easily accessible. If you do
not intend to use the amplifier for a considerable
length of time, disconnect the plug from the AC
Mains Socket. Do not use an extention cord.
Earth Grounding Connection:
To prevent electric shock, do not remove the
grounding plug on the power cord, or use any plug or
extension cord that does not have a grounding plug
provided. Make certain that the AC outlet is
properly grounded as well. Do not use an adapter
plug with this product.
Do Not Open the Amplifier Enclosure:
There are no user serviceable parts inside this
product. Opening the amplifier enclosure may
present a shock hazard. Modification to the product
will void your warranty. If liquid enters the unit,
or any metal object such as a paper clip
accidentally falls inside the enclosure, disconnect
the unit from the AC power source immediately and
consult an authorized service station.
Setup:
To insure proper operation and to avoid potential
safety hazards, place the unit on a firm, level surface.
Do not plug or unplug the instrument or speaker
cable while the amplifier power is on.
Heat & Ventilation:
Make sure there is space provided for proper
ventilation. Avoid using in extremely hot or cold
locations and areas that are exposed to direct
sunlight or near heating equipment. Avoid using in
moist or high humidity areas.
NEVER BLOCK
THE FAN VENT HOLES ON THE SIDES
OF THE UNIT.
Summary of Contents for MB Fusion 800
Page 1: ...MB 500 OWNER S MANUAL ...
