5
LEGACY SERIES COMBOS
Safety Information
Please read all enclosed safety precautions before
connecting or operating this product.
Verify Line Voltage and Amperage:
Your
amplifier has been factory configured to use with
the line voltage 100-240Vac 50/60 Hz.
100-120 Volt/60Hz 15A circuit for USA and
Canada.
220-240 Volt/(50/60Hz) 10A circuit for UK
and Australia.
220-240 Volt/(50/60Hz) 10A circuit for
Europe.
100-120 Volt/50Hz 15A circuit for Japan.
220-240 Volt/50Hz 10A circuit for Korea.
Proper AC circuit for all other countries.
Connecting the amplifier to a line with
specifications other than indicated above can
create safety and fire hazard, and may damage the
amplifier. If you have any questions about the
voltage requirements for your specific model, or
about the line voltage in your area, contact your
dealer before plugging the unit into a wall outlet.
Verify AC Circuit Capacity Before Use:
The
high power output of your amplifier may require
heavy current draw under full load conditions. To
insure proper performance and avoid potential
safety hazards, we recommend connection to line
circuits with amperage specified “as above”.
Connecting to the same circuit used by other
heavy power devices, such as high wattage lights,
may cause circuit breakers to trip. It is always a
good idea to avoid using any audio equipment on
the same AC circuit as equipment with motors,
such as air conditioners or refrigerators. This will
lessen the possibility of power variation and
electrical start up noise affecting your sound.
AC Power Cord:
To avoid safety hazards, use
only the power cord supplied with your unit. If a
replacement cord is needed, make certain to use a
standard IEC compliant cord. Damaged power
cords should be replaced immediately. When
setting up, make certain that the AC plug is easily
accessible. If you do not intend to use the
amplifier for a considerable length of time,
disconnect the plug from the AC mains socket.
Do not use an extension cord.
Earth Grounding Connection:
To prevent
electric shock, do not remove the grounding plug
on the power cord, or use any plug or extension
cord that does not have a grounding plug
provided. Make certain that the AC outlet is
properly grounded as well. Do not use an adapter
plug with this product.
Do Not Open the Amplifier Enclosure:
There
are no user serviceable parts inside this product.
Opening the amplifier enclosure may present a
shock hazard. Modification to the product will
void your warranty. If liquid enters the unit, or
any metal object such as a paper clip accidentally
falls inside the enclosure, disconnect the unit from
the AC power source immediately and consult an
authorized service station.
Setup:
To insure proper operation and to avoid
potential safety hazards, place the unit on a firm,
level surface. Do not plug or unplug the
instrument or speaker cable while the amplifier
power is on.
Heat & Ventilation:
For proper ventilation,
make sure there is at least 8” or 20cm clearance at
the back of the unit. Avoid using in extremely hot
or cold locations and areas that are exposed to
direct sunlight or near heating equipment. Avoid
using in moist or high humidity areas.
Safety Information
USA:
Indoor use only.
Norway:
Apparatet må tilkoples jordet stikkontakt
Sweden:
Apparaten skall anslutas till jordat uttag
Finland:
Laite on liitettävä suojakoskettimilla
varustettuun
pistorasiaan
Denmark:
“Apparatets stikprop skal tilsluttes en
stikkontakt med jord, som giver forbindelse til
stikproppens jord.”
China:
在海拔高度
2000
米或更低和非热带位置仅用
