6
LEGACY SERIES
LEGACY SERIES
2
3
4
5
6
7
8
9
15
16
17
18
19
20
1
Front Panel Features
Input:
¼” analog input to receive
instrument signal.
Trim:
Attenuates the level of signal
coming in from the ¼” input.
*The default
position is full clockwise. Lower settings
should only be used if clipping is audible
or the Trim knob indicator flashes red
more than occasionally as the instrument
is played aggressively.
Drive:
Adjusts the amount of saturation
when Overdrive is active.
Level:
Adjusts the output level when the
Overdrive circuit is active.
Bass:
Boosts or cuts bass frequencies
centered at 60Hz.
Lo-Mid:
Boosts or cuts low-mid
frequencies centered at 250Hz.
Hi-Mid:
Boosts or cuts hi-mid frequencies
centered at 1kHz.
Treble:
Boosts or cuts treble frequencies
centered at 7 kHz.
Master:
Sets the output volume of the
speaker and headphone outputs.
Stby:
Indicates unit is attached to mains
power.
Pwr:
Illuminated when unit is powered on.
OT:
Indicates unit is experiencing a fault
related to over temperature.
OC:
Indicates unit is experiencing a fault
related to over current draw.
Clip:
Flashes when incoming signal
exceeds the input circuit’s capability.
Overdrive:
Engages the Overdrive curcuit
when placed in the up position. LED
indicator is lit when Overdrive is active.
Edge:
Adjusts the high freq. response of
the Overdrive circuit.
Bump:
Applies
low
frequency
enhancement when placed in the up
position.
Contour:
Reduces mid frequencies and
boosts low and high frequencies when
placed in the up position.
Presence:
Applies high frequency
enhancement when placed in the up
position.
Mute:
Mutes main speaker and all other
outputs except the tuner output. LED
indicator is lit when Mute is enabled.
1
2
3
4
5
6
7
8
9
10 11 12 13 14
15
16
17
18
18
20
10
11
12
13
14
Front Panel Features
