HWMC
4
All copying, even partial, of this manual is strictly forbidden
RG66008809 - Rev 00
GENERAL CAUTIONARY NOTES
- Please keep this manual complete and in good condition for the entire life of the machine.
- Carefully read all the information contained in this manual, paying special attention to sections marked “Important” and “WARNING”; failure to comply
with the instructions provided could result in injury to persons or damage to the equipment.
- Should a fault occur, consult this manual and if necessary contact the nearest Galletti S.p.A. service centre.
- All installation and maintenance operations must be carried out by qualified personnel, unless otherwise indicated in this manual.
- FIRST START-UP MAY BE CARRIED OUT SOLELY BY QUALIFIED TECHNICIANS DULY AUTHORIZED BY GALLETTI S.P.A. (SEE ENCLOSURE)
- Before performing any work on the unit, disconnect it from the power supply.
- Failure to comply with the rules provided in this manual will result in the immediate invalidation of the warranty.
- Galletti S.p.A. shall not accept any liability for injury or damage resulting from improper use of the equipment or failure to comply with the directions
provided in this manual and on the unit itself.
-
It is mandatory to install filters to protect the heat exchangers. Failure to do so will invalidate the warranty.
- For any further information, contact the manufacturer: [email protected]
- To get the weight of the unit, refer to the User Manual, Rated technical data table.
IMPORTANT:
1) (a) Do not use heat transfer fluids other than those specified.
(b) This unit is not suitable for use in Atex environment or with inflammable heat transfer fluids.
(c) Use original factory parts only.
(2) Use appropriate PPE (refrigerant protection gloves, protective goggles).
(3) If protection grilles (accessory) are not provided or if the unit can be reached by unauthorized persons, special protection barriers should be provided
in order to prevent access to the finned coil.
(4) Upstream from the power supply it is necessary to install a differential switch for protection against earth connection failure.
SAFETY SYMBOLS
Carefully read this manual
WARNING
Use individual protective
devices
USE APPROPRIATE PPE (REFRIGERANT PROTECTION GLOVES, PROTECTIVE GOGGLES).
