Gallet VEN 11T Lestre, Instruction Manual, Page: 23 / 36

EN - 23
EN
III. INSTRUCTIONS FOR USE
Assembling of unit (see Fig. 1)
Take all parts out of the box and remove all packing material.
1) Unscrew the base nut P9 from the bottom part of the fan body P1 .
2) Assemble the base P8 .
3) Put the base P8 on the bottom part of the fan body P1 and fix it by tightening the nut
P9
. The power cord
P11
must be in groove
P10
.
Note:
Apply reverse procedure to disassemble the unit.
Control
The assembled fan, plug power supply P11 fork to the electric power.
Turn on the fan by pressing one of the four buttons on the fan base P4 .
First button switches the fan off. Description of buttons:
Button (3) – High air flow velocity
Button (2) – Medium air flow velocity
Button (1)
– Low air flow velocity
Button (0) – Off
Oscillation
Oscillation is controlled by the button P6 (ON / OFF). For run the oscillatoin (rotate from
side ti side) press the Oscilation knob. Stop the oscillation by pushing the knob.
Timer
The operation time is adjustable from 1 to 120 min. by the timer rotary regulator P5 . Once
the rotary regulator reaches the position „ “ (after the set time expires), the fan will
automatically switch off.
Note:
If you want the fan to operate non-stop (with no time limit), set the rotary regulator
P5 to
the position „ “.
IV. MAINTENANCE
Unplug the unit before cleaning or storing. Wipe the unit with an absorbent tissue, paper
towel or soft cloth. Never use an abrasive to clean the appliance. Do not immerse the
appliance or the cord in water or any other liquid.
V. TROUBLESHOOTING
The device is not working
• Check that the mains connection cable is firmly plugged in.
• Check the right function of outlet. Test outlet with other electrical appliances.
• Check the supply cord to ensure no damaged is evident.