Gallet PEP 906, Instruction Manual

Page: 13 / 20

ENG - 13
ENG
Description of the controls
P1. Unit of scale
P2. Display
P3. Glass surface
Instructions for Use
1 pc of lithium battery (CR2032).
Please remove the isolation sheet from the battery
contact before use. Please take note to the polarity.
To replace battery
Open battery case cover on the back of scale,
if battery case is the type shown in picture.
Bend the small black tab outwards and the
battery will come out .Take note not to bend the
contact.
Install new battery by putting one side of the
battery beneath the contact and then pressing
down the other side.