Gallet MT 190, Instruction Manual

Page: 23 / 40

Dear customer, thank you for purchasing our product. Please read the operating instructions
carefully before putting the appliance into operation and keep these instructions including
the warranty, the receipt and, if possible, the box with the internal packing .
I. SAFETY WARNINGS
– Consider the instructions for use as a part of the appliance and pass them on to any
other user of the appliance.
– Check whether the data on the type label correspond with the voltage in your socket.
The power supply plug has to be connected to a socket of electrical installation that
conforms to respective standards.
–
Never use the appliance if the power cord or power plug are
damaged, if it is not functioning correctly or if it has fallen on the fl
oor and been damaged or if it has fallen into water. In such cases
take the appliance to a professional service centre to verify its
safety and correct function.
–
This appliance must not be used by children. Keep the device
and its supply cord out of reach of children. The device may be
used by persons with reduced physical or mental abilities or lack
of experience and knowledge only if they are under supervision or
they have been instructed about using the appliance safely and
understand the potential dangers. Children must not play with the
appliance.
–
Be careful when pouring hot liquid into the food processing device
or the mixer because it may spurt out of the appliance because of
sudden boil.
–
If the power cord of this appliance is damaged, the cord must be
replaced by the manufacturer, their service technician or by
a similarly qualifi ed person, this will prevent the creation of
a dangerous situation.
–
Always unplug the appliance from power supply if you leave it
unattended.
–
Before replacing accessories or accessible parts, which move
during operation, before assembly and disassembly, before
cleaning or maintenance, turn off the appliance and disconnect it
from the mains by pulling the power cord from the power socket!
–
Be careful when handling the blender, the knife is very sharp!
– When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
– Every time before the propulsion unit is switched on, the container needs to be
attached properly and the lid needs to be placed appropriately so as to close the
container. The safety plug needs to be inserted in the lid.
– Never remove or attach the container while the propulsion unit is in operation.
Thus you avoid the risk of injury or damage to the appliance.
– After finishing work and before cleaning, always switch off the appliance and
disconnect it from power supply by taking the power cord connector out of the
electric socket.
23
EN
/ 35