Gallet CCH 130, Instruction Manual

Page: 27 / 44

EN - 27
EN
Note:
After turning on the appliance, “
0
” will appear on display
B1
.
„ “ button to set temperature (B3)
– set the temperature (1, 2, 3, 4, 5, 6, 7, L – low temperature) by button B3
– the temperature interval is 30-60 °C
„ “
button to set time (B4)
– set the operation time by button B4 in the interval 1-9 hours
„ “
button to set the pre-heating function (B5)
– by pressing B5 button, bed pre-heating function will be activated
– the temperature will be automatically set to H – high temperature
– the timer will be automatically set to 9 hours
– after 1 hour of operation, the temperature will be reset from H to L
Use:
• Cover yourself with the blanket. The end without controls is the foot end. Make sure the
blanket is not creased or folded.
• Connect the appliance to mains.
• Switch on the appliance by setting B2 switch to position “ ON ”.
• Set the operation time and temperature by
B
controller. The time and temperature are
shown on B1 display.
• The blanket may be switched off at any time by switching B2 switch to position “ OFF “.
• When the electric blanket is on, the control must not be covered. Make sure not to put
the control under the quilt or the pillow, or other objects, let alone close to other heating
sources - the control could be overheated and damaged.
• If you sleep on the blanket, can not be turned on all night.
Notes:
• If you use the blanket as a bottom layer, put it on bed and cover it with a sheet or a quilt.
• If you want to preheat the bed, we recommend using the “pre-heating” function (
B5
button).
IV. MAINTENANCE
Disconnect the controller B from the heating blanket A . Wipe the controller B with a damp
cloth. The heating blanket A may be machine washed. However we recommend hand-
washing to prolong the appliance service life. Never use any aggressive cleaning agents
and industrial solvents for cleaning. After washing, hang the blanket over clothesline (do
not use pins) and let it completely dry.
Washing the blanket in a washing machine
Before washing the heating blankets, make sure that the blankets are in a good working
condition and are not damaged.
1) Take the blankets from the bed and disconnect the detachable connector to make sure
that the controller and power cord are not connected to the blankets.
2) Put the blankets in the washing machine as when washing clothing. You can put the
whole blankets in the washing machine, however, it is necessary to disconnect and
take the switch out.