II. FEATURES OF THE DEVICE AND ACCESSORIES
A – propulsion unit
A1 – temperature and air flow intensity switch
position
0
– off
position
1
– medium temperature and air flow intensity
position
2
– max temperature and air flow intensity
A2 – attachment arrest button
A3 – turning joint of the power supply
A4 – loop for hanging
A5– supply cord
B – round brush
20 mm
A2
A1
A
B
A3
A4
A5
1
2
3
4
5
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the hair straightener. Remove all possible
adhesion foils, stick-on labels or paper from the appliance. As shown on the picture,
slide on the attachment
B
on the propulsion unit
A
with a slight push. Plug the fork of the
supply cord
A5
into the el. socket. Switch the switch
A1
either to position 1 (warm air) or to
position 2 (hot air). Turn the appliance off by switching the switch
A1
to position
0
. Remove
the attachment from the propulsion unit according to the picture.
IV. MAINTENANCE
Turn off the appliance before any maintenance, disconnect it from power supply by
unplugging the power cord from the electric socket and let it cool down! Do not use
rough and aggressive detergents (e.g. sharp objects, scrapers, diluting agents
or other solvents)!
Treat the surface with a wet and soft cloth.
19 / 25
GB