Gallet BOU 801WB, Instruction Manual

Page: 14 / 20

ENG - 14
Description of the controls
P1. ON/Off switch
P2. Water level scale
P3. Lid
P4. Button for opening hinged lid
P5. Multi-directional basement
Instructions for Use
Before youbegin to operate the kettle:
Before first ussage, boil water in the kettle for several times and pour it out completely. Follow
carefully some recommendations for use mentioned below:
Unwind sufficient lenght of the cord from the storage area to reach the power outlet. Then
place the basement on a dry, flat surface.
Open the lid and fill the kettle with cold water.
Make sure that the water level is between the minimum and maximum marks on the water
level scale. Do not switch on the kettle when it is empty.
Check and correct the filter’s position before boiling the water. The automatic shutt off switch
may not work without the filter properly.
Close the lid and place the kettle back on the basement.
Plug it to AC outlet with the voltage which corresponds to the information on the product
label.
Switch the kettle on by the main switch.
When the water has boiled, the kettle will switch off automatically.
Do not remove the kettle from the basement without previous switching off.
Remember if you wish to re-boil the water, put the main switch of the kettle to the “ON” posi -
tion.
The kettle may be switch off at any time by either pushing the main switch of the kettle to the
“OFF” position.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)