EN - 19
EN
2) Unscrew the nut
P9
and place the bottom cover
P10
on the base
P11
. Return the nut
P9
in place.
3) Slide the base cover onto cross base along the lower pipe.
4) Slide out the extension rod
P8
from the main base
P11
and mount the engine unit
P6
on its top.
5) Place the motor and switch box firmly on the top of the extension pole, and tighten screw B
P7
6) Unscrew the gril nut
P15
from motor cover
P4
and put the rear grill
P3
on the motor cover
P4
. After
this tighten the rear grill by nut
P15
.
7) Place the blade
P2
and tighten by blade nut P16.
8) Fasten the vane
P19
on the front grill
P1
by swivel adjustment knob
P18
(if not already fitted at the factory).
9) Once finished, put the front protective cover
P1
on the rear protective cover
P3
and secure it with
buckles
P17
and screw D
P22
.
10) Adjust the required height and secure in place by tightening the nut
P9
.
11) If needed, you can adjust the air flow angle by the joint
P23
.
Velocity control and selection
Plug the assembled fan into wall socket. Turn on the fan by pressing one of the four buttons on the fan
base. First button switches the fan off. Description of buttons:
Button (3)
– High air flow velocity
Button (2)
– Medium air flow velocity
Button (1)
– Low air flow velocity
Button (0)
– Off
Oscillation
For run the oscillatoin press the Oscilation knob
P5
. To stop oscillation, pull the oscillation knob
P5
out.
IV. MAINTENANCE
Unplug the unit before cleaning or storing. Wipe the unit with an absorbent tissue, paper
towel or soft cloth. Never use an abrasive to clean the appliance. Do not immerse the
appliance or the cord in water or any other liquid.
V. TECHNICAL SPECIFICATIONS
-
Acoustic noise level of 45 dB(A) re 1pW; Input 45 W; Protection class II;
-
Size: 42,5 x 120 x 62 cm; Weight (NETTO): 2,6 kg; Power consumption in off mode is 0.00 W.
Expert service must do the large maintenance or to intervene into inside parts of the appliance!
Non-observance of the instructions of the manufacturer cancels the right for guarantee repair!
The manufacturer reserves its right for unimportant deviations from the standard design
without influence of the product function.
VI. LEGISLATIVE & ECOLOGY
WARNING:
DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO AVOID FIRE
OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE PRODUCT WHEN YOU
DON’T USE IT OR BEFORE A REVISION. THERE AREN’T ANY PARTS IN THIS APPLIANCE
WHICH ARE REPARABLE BY CONSUMER. ALWAYS APPEAL TO A QUALIFIED
AUTHORIZED SERVICE. THE PRODUCT IS UNDER A DANGEROUS TENTION.
Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and other
European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product (or battery/
accumulator) shall not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of materials will help to
conserve natural resources. For more detailed information about recycling of this product,
please contact your local Civic Office, your household waste disposal service or the shop where you
purchased the product.
Summary of Contents for Blizzard VEN 16S
Page 28: ......
