ENG - 32
TROUBLE-SHOOTING
Faults can occur on all electrical equipment. This must not necessarily be due to a defect
in the device itself. So check first with table if the fault can be dealt with.
Problem
Possible causes
Solutions / tips
Weak suction
The secondary valve is open. Close the secondary valve
An object is blocking the suction
pipe
Check the suction tube, the han
-
dle area, suction pipe and the
nozzle in use for blockages.
Filters are not fitted properly or
are blocked
Fit a new filter
Device does not work.
Device is not properly plugged
into the mains
Check that the mains plug has
been inserted properly. Also
check whether the power socket
is in order (e.g. use an electric
torch). Check
the fusels! Automatic fuses in the
fuse box
Thermostat automatic turned
off the unit
Follow instructions on page 31,
section Motor thermostat
Don´t close front cover
Isn´t the filter bag placed in the
body. Isn´t the sitting corrected
Please replace correctly the filter
bag
The cord can not be retrated
Isn´t the core tangled?
After unfastening tangled cord.
Pull out the by 1 or 2 meter and
push button to wind it again.
