Gallet ASP 130, Instruction Manual

Page: 24 / 40

– Do not use the vacuum cleaner to vacuum dirt produced during/after construction such as
plasterboard dust, fine sand, cement, dust from construction, parts of plaster etc.
– WARNING : There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
ACCESSORIES AND ASSEMBLY OF THE APPLIANCE:
– Do not put the suction nozzle or the tube end or accessories close to eyes and ears and do
not insert them into body orifices!
POWER CABLE:
– Check whether the data on the type label corresponds with the voltage in your socket.
The power cord plug may only be connected to the electrical socket complying with the
applicable standards.
–
If the power cord of the appliance is corrupted, it has to be replaced
by the manufacturer, its service technician or a similarly qualified
person.
–
Always disconnect the appliance from power by unplugging
the power cord from the electrical socket, if the appliance is left
unattended and before assembly, disassembly or cleaning.
–
Never use the appliance if the power cord or power plug are
damaged, if the appliance is not correctly operating or if it has fallen
on the floor and been damaged, or if it has fallen into water.
– Do not apply force to unwind the cord beyond the red mark.
– Do not unplug the power plug by pulling the power cord or the vacuum cleaner unit.
– When winding the cord, hold the plug to prevent lashing of the cord around and to prevent
possible injury.
– The power cord must not be damaged with sharp or hot objects, open fire, it must
not be sunk into water or bent over sharp edges.
– Check the condition of the power cord of the appliance regularly.
II. EQUIPMENT AND ACCESSORIES
A – vacuum cleaner
(Fig. 1, 2, 4)
A1 – ON/OFF ( ) button
A2 – power cord winding button
A3 – suction vent
A4 – depression for attachment of accessories
A5 – power cord
A 6 – rear wheels
A7 – exhaust grid
A8 – output HEPA filter
A9 – foam micro–filter
B – dust c ontainer (Fig. 3)
B1 – cover
B2 – holder
B3 – container lock button
B4 – bottom lock button
B5 – bottom flap
B6 – HEPA filter
B7 – separator
C – accessories
(Fig. 1)
C1 – floor nozzle
C2 – upholstery nozzle
C3 – crevice nozzle
C4 – brush
C5 – suction hose
C6 – suction tube
C7 – telescopic suction tube locking
EN
24 / 32