19.11.2021, 11:52
Base Block
base.galileosky.com/articles/#!en-documentation/base-block-user-manual
6/28
VCC
Positive supply voltage
GND
Negative supply voltage
IN0
Zero analog-discrete input
IN1
1st analog-discrete input
IN2
2nd analog-discrete input
IN3
3rd analog-discrete input
RS485A
A signal of RS485 channel
RS485B
B signal of RS485 channel
RXD0
RXD signal of zero RS232 port (only for Optimum/Iridium/Wi-Fi/Hub/3G m
TXD0
TXD signal of zero RS232 port (only for Optimum/Iridium/Wi-Fi/Hub/3G m
RXD1
RXD signal of the first RS232 port (only for Optimum/Iridium/Wi-Fi/Hub/3G
modifications)
TXD1
TXD signal of the first RS232 port (only for Optimum/Iridium/Wi-Fi/Hub/3G
modifications)
CAN_H
CAN_H contact of CAN interface (only for Optimum/Iridium/Wi-Fi/Hub/3G
CAN_L
CAN_L contact of CAN interface (only for Optimum/Iridium/Wi-Fi/Hub/3G
Vol0
Zero contact to connect an external speaker for Autoinformer (only for
Optimum/Iridium/Wi-Fi/Hub/3G modifications)
Vol1
First contact to connect an external speaker for Autoinformer (only for
Optimum/Iridium/Wi-Fi/Hub/3G modifications)
1-Wire
1-Wire interface
GND
Ground to connect interfaces which need the ground contact
Out0
Zero transistor output (output 0/1)
Out1
First transistor output (output0/1)
