TCP/IP Print Server – Changing TCP/IP or Host Access Configuration (10/29/01 mlr)
3
Introduction
TCP/IP Print Servers, not to be confused with Network Print Servers such as HP JetDirect, are
used to receive and distribute messages to the various Apollo® printing devices. This includes
Ticket Printer, Itinerary/Invoice Printers, OSDP Manager and back office Accounting Interface
(MIR).
Galileo also provides Focalpoint Print Manager™, a Windows™ based print distribution
application. If you use this solution for Galileo® or Apollo® host printing, please refer to the
instruction guide for that application to make appropriate changes.
This document will provide the steps required in changing configuration settings. These include:
IP Address, Subnet Mask and Default Gateway:
Used to communicate with the Host
Reservation System
Configuration Servers:
The servers used to authenticate users into the Galileo® or Apollo®
system
Client Identifier:
Alphanumeric code used to authenticate users into the Galileo® or Apollo®
reservation system.
GTID (Global Terminal Identifier):
A six digit alphanumeric code used by Apollo® or
Galileo® to identify a print device.
Before you begin
Gather the information indicated above from your Travel Management Company or Apollo
Account Representative:
IP
ADDRESS:
____.____.____.____
SUBNET MASK:
____.____.____.____
DEFAULT GATEWAY:
____.____.____.____
CONFIG SERVER ADDRESS: ____.____.____.____ (Primary)
____.____.____.____
(Secondary)
Note:
Config Servers for Apollo® System:
198.177.164.151 (Primary)
198.177.164.152
(Secondary)
Note:
Config Servers for Galileo® System:
57.8.81.13 (Primary)
57.8.81.113
(Secondary)
GTIDS:
#1: __________
#2: __________
#3: __________
#4: __________
#5: __________
#6: __________
#7:
__________
Note:
Print Servers may be configured with less then 7 GTIDS.
