Galileo Maestro II, User Manual, Page: 59 / 73

Galileo
Page 50
In this case the TIME field assigns a value which indicates the repetition
speed between stages, while the value assigned to the FEEDBACK
indicates the total effect fade time.
Use the CURSOR keys to select the parameter and the ENCODER to
change the values.
MIC. P2 (F4)
MICROPHONE SHIFTER
This section refers to the pitch shifter effects which can be added to
the microphone.
The display shows 3 parameters, as follows: PRESET , SHIFT and BALANCE .
PRESET
You are offered a series of presets. When this parameter is set as
NO PRESET, you can create new setups using the SHIFT parameter.
SHIFT
this parameter indicates the shift (transposition) of the voice which
is added to your own voice, with values ranging from –12 to +12 (in
semitones).
BALANCE
This parameter balances the voice on the SHIFT effect, with values
ranging from 0 to 127. If the value 0 is selected, you will only hear the
SHIFT effect. As you gradually turn the ENCODER the value rises,
moving the balance to the voice alone without SHIFT. With a setting in
the middle of the range, 64, you will hear that the voice and SHIFT are
perfectly balanced.
Use the CURSOR keys to select the parameters and the ENCODER to
change the values.
EFFECT STATUS at the
top of the screen
indicates whether the
effect is enabled (ON) or
disabled (OFF).