Galileo Concerto, User Manual, Page: 13 / 54

11
Concerto
User Manual
6.1 REGULATING THE REVERB DEPTH
To regulate the reverb depth, meaning the time for which the sound reverberates in the
room, select your chosen effect and keep the [REVERB] button pressed for a few moments.
The display will show the value currently set:
Use the [VALUE] buttons to set the value, bearing in mind that 0 means no reverb and 20
gives the maximum reverb depth.
Pressing the two [VALUE] buttons simultaneously recalls the default value for the active
voice or effect.
Press the [REVERB] button again to confirm the value.
Whilst adjusting the reverb depth, it is possibile to select other voices or other reverbs.
The display will show automatically the new value. In case the selected voice does not
contain any reverb effect, the display will show:
meaning “No Reverb”.
NOTES
The reverb depth may be set with different values depending on the mode
(Single, Dual or Split) selected. Therefore, Room can be set with depth 8
when playing in Single mode, or at 12 with the Dual mode active.
When setting the reverb, always remember that the value is memorised
for the effect and voice currently active. This means that a reverb depth of
15 can be set for the Room effect when applied to Grand Piano, with 7 set
for the same effect when used with E.Piano 1.