ADP 4000 Quick Reference Card
Locked Stock Bin
If you ordered the ADP4000 with a
locked stock box. Follow these steps to
install:
1. Locate the stock bin and use the keys
provided to open the door.
2. Locate the two captive thumbscrews
inside the stock bin.
3. Locate the stock bin behind the unit
and line up the thumbscrews with the
brass inserts in the Unit’s main case.
4. Screw in the thumbscrews until hand
tight.
The stock bin may be configured to hold
two (2) secured stacks of 500 coupons
for each bin:
1. Install the removable shelf as shown
in the figure above.
2. The stock bin can now be loaded with
two stacks of 500 coupons each, both
of which are secured when the door is
closed and locked.
3. Load stock into the stock bin and load
bin inputs as defined in the previous
section.
The stock bin may be configured to hold
one (1) secured stack of 1000 coupons
for Bin A and another unsecured stack of
1000 coupons for Bin B:
1. Remove the shelf and place in the
bottom of the stock bin as shown in
the figure above.
2. If using Bin B, slide the Bin B entry
latch and flip the entry point door
down.
3. Load stock into the stock bin for Bin A
only and stock for Bin B if applicable
directly behind the stock bin. Load
bin inputs as defined in the previous
section.
ADP 4000 Printer
Quick Reference Guide (January 2007)
Galileo by Travelport obtained written permission from Unimark to reproduce contents of the Sprite Quick Reference Card 71U-1405-500; REV B, © 2006 Unimark Products, LLC. for
the ADP 4000 Quick Reference Card. No part of this publication may be reproduced or transmitted without prior written permission of Galileo by Travelport, or Unimark, Inc.
3
