ELECTRIC ROLLERDOOR – J BRACKETS
Installation
-
20
-
ENG
14. CE Marking Electrically Operated Products under Machinery Directive
It is the responsibility of the installer to check that the installation conforms to
the specific safety features detailed in the Manufacturer’s Installation
Instructions, to issue the CE Declaration of Conformity and mark a power
operated product under the Machinery Directive 2006/42/EC.
To do this you will
require the following which should be delivered with the product:
1) This set of Installation Instructions
(operating and maintenance instructions)
2) Maintenance Log Book,
(including Installation Checklist and Customer Declaration of
Conformity)
3) 1 x Declaration of Conformity (Installer Copy) –
to be completed
4) A CE Label
When CE marking a power operated Galebreaker product, it is vital to follow the
steps outlined below:
a)
Install the product as per instructions, with no adaptations or modifications and
complete of the
Health and Safety Checklist
in the Maintenance Log Book
.
b)
Complete the two ‘Declarations of Conformity’ using the following:
Model Type:
As
shown
on
CE
Label
Serial Number:
As
shown
on
CE
Label
Installation Company:
Your
company
name
Date
Installed:
Date Installed
Declaration made by:
Responsible
Person
Declaration and Instructions received by:
Customer’s
Signature
c)
Fix the supplied CE label to the bottom tube. The label should be accessible /
visible. Where the serial number does not incorporate the door size, add the
Product width and Product height to the end of serial number using a permanent
marker pen. i.e. the full serial number should read
Serial
Number:
1234
/
RDE
W
X
H
[
W
] Product Width (m)
[
H
] Product Height (m)