Galeb GP-200
User Manual
Page 39
This option can be made only if it was done daily report. Formatting is
a process that takes several minutes and during that time you should
not turn off the device, because it may occur data loss.
11.4 Print PLU base
Here we shall print base of all articles a fiscal device. Confirmation is
made to the TOTAL key and stops the already started printing, the key
C. In this case, the printer will print a message “
Operation canceled”!
11.5 Delete PLU base
In this sub-menu, pressing the TOTAL, after that, you need to confirm
the execution of deleting data base, by pressing key TOTAL again.
11.6 Option use code for article
Basic setings during entering articles is that can
only be entered bar codes, which can have a maximum of 15 digits.
Menu 4.6 allows, additional entry shortened code, which will be linked to
the bar code, the next time you entering articles in the database.
With this option, when entering the new articles, you get another sub-
menu for entering internal code, prior to what you can perform direct sales
of articles, calling this code from the keyboard.
Can be programmed up to 500 items like this, in the range from 1 to 500.
11.7 Printing with code
The sub-menu allows printing items from the database items that contain
an internal code.
Printing with inter. code - print articles that have defined the internal codes.
11.7 Printing NON Tax article
