Hardened Ethernet Switch
5
Functional Description
•
Meets NEMA TS1 & TS2 environmental requirements
for traffic control equipment.
•
Meets EN61000-6-2 & EN61000-6-3 EMC Generic
Standard Immunity for industrial environment.
•
Supports IEEE802.3/802.3u/802.3x. Auto-negotiation:
10/100Mbps, Full/Half-duplex, Auto-Negotiation, Auto
MDI/MDIX.
•
100Base-FX: Multi/Single mode SC or ST type.
100Base-BX: WDM Single mode SC type.
•
Supports 4096 MAC addresses. Provides 1.625M bits
buffer memory.
•
Alarms for power failure by relay output 1A @ 24VDC.
•
Power Supplies: Redundant 12-48VDC Terminal Block
power inputs and 12VDC DC JACK with 100-240VAC
external power supply.
•
Field Wiring Terminal: Use Copper Conductors Only,
60/75
℃
, 14-24 AWG torque value 4.5 lb-in.
•
Operating voltage and Max. current consumption: 0.7A
@ 12VDC, 0.35A @ 24VDC, 0.175A @ 48VDC. Power
consumption: 8.4W Max.
•
-40
℃
to 75
℃
(-40
℉
to 167
℉
) operating temperature
range. Tested for functional operation @ -40
℃
to 85
℃
(-40
℉
to 185
℉
). UL508 Industrial Control Equipment
certified Maximum Surrounding Air Temperature @ 75
℃
(167
℉
).
•
For use in Pollution Degree 2 Environment.
•
Supports DIN-Rail or Panel Mounting installation.
Assembly, Startup, and Dismantling
•
Assembly: Place the switch on the DIN rail from above
using the slot. Push the front of the switch toward the
mounting surface until it audibly snaps into place.
