Galaxy TVisto, User Manual

Page: 21 / 31

■
16
Video Settings
These settings configure the provided Video Output Format:
•
NTSC Composite/S-Video
•
PAL Composite/S-Video
•
NTSC Component
•
PAL Component
•
NTSC SCART
•
PAL SCART
•
High Definition TV at 480p
•
High Definition TV at 720p
•
High Definition TV at 1080i
•
VGA (at 1024x768)
Use the
▲▼ navigation buttons to
select your Video setting. Press PLAY/ENTER button to activate it. Press the HOME button
of the remote to save the setting. Once activated, the video out will switch to the selected
format.
Please note that you should have already connected the correct cable before
configuring the video settings; otherwise, the TV screen may not display properly. For
example, before enabling the “NTSC SCART” option, you should have already
connected the SCART cable.
In case of any setting errors (e.g. the simple Composite AV cable is connected and
you setup NTSC Component with no display on the TV screen), press the “VIDEO
OUTPUT” key on the remote control repeatedly until you see the correct display. You
can then choose the right Video via “Settings” and save it via the HOME button.
TV Type
Select one of the listed types of TV display physical aspect rations.
Press the HOME button on the remote to save the setting.
Screen Saver
Select the time interval to enable the screen saver when your TVisto device is idle.
There are three (3) predefined time intervals of 5, 10, and 30 minutes, and one to disable the
screen saver.
Use the
▲▼ navigation buttons to select your screen saver. Press the HOME button of the
remote to save the setting.