Galaxy Hunter Series Manual Download Page 71

Page: 71 / 200

Figure 4-58 Counting

Step 2 Select the

Enable

check box, and then configure counting method and alignment.

Step 3 Move the counting box to the position you want in the image.

Step 4 Click

Save

4.5.2.3.10 Configuring Structured Statistics

The image displays structured statistics. When the overlay function enabled during intelligent

rules configuration, this function is enabled simultaneously.

Step 1 Select

Setting > Camera > Video > Overlay > Structured Statistics

The

Structured Statistics

interface is displayed. See Figure 4-59.

Figure 4-59 Structured statistics

Step 2 Select the

Enable

check box, select the statistics type, and then

select text align.

Step 3 Move the structured statistics box to the position you want in the image.

Step 4 Click

Save

Summary of Contents for Hunter Series









































































































































































































Search results

Summary of Contents for Hunter Series

Reviews:

Galaxy Hunter Series, Manual, Page: 71 / 200

Search results

Summary of Contents for Hunter Series

Reviews: