Galaxy Hunter Series Manual Download

Page: 158 / 200

150

Figure 5-44 Modeling status (thumbnail)

5.10.3 Setting Face Recognition Alarm Linkage

When face recognition succeeded or failed, the device links alarm out.

Step 1 Select

Setting > Event > Face Recognition > Alarm

The

Alarm

interface is displayed. See Figure 5-45.

Figure 5-45 Alarm (face recognition)

Step 2 Select a face database and an alarm rule.



Face recognition succeeded: When the detected face matches that in the face

database, the device links alarm out.



Face recognition failed: When the detected face fails to match that in the face

database, the device links alarm out.

Step 3 Set alarm linkage actions. For details, see "5.1.1 Alarm Linkage."

Step 4 Click

Save

5.10.4 Viewing Face Recognition Result

View face recognition result on the

Live

interface or by the search function.

5.10.4.1 Viewing Result in the Live Interface

View face recognition result on the

Live

interface. See Figure 5-46.



Face recognition result is displayed at the left side and the captured face pictures and

attribute information at the right side.



Click a face picture in the display area, and the information is displayed.

Summary of Contents for Hunter Series









































































































































































































Search results

Summary of Contents for Hunter Series

Reviews:

Related manuals for Hunter Series

Brands by name

Popular brands

Galaxy Hunter Series, Manual

Search results

Summary of Contents for Hunter Series

Reviews:

Related manuals for Hunter Series

Brands by name

Popular brands