119
The
Smart Track
interface is displayed. See Figure 5-10.
Figure 5-10 Smart track
Step 2 Select scene number under the video images in turns (See Figure 5-11) to add
calibration points on the video images of the corresponding scene. Scene numbers 1 to
4 are four splitting scenes of spliced image, and at least add four calibration points on
each scene.
Figure 5-11 Selecting scene number
Add calibration points according to the following procedure.
1) Adjust the video image of the speed dome to a position aligned with the panoramic
image, and then click
.
Calibration box is displayed in the images of speed dome and panoramic camera.
2) Drag the calibration box to a proper position, and click
to save one pair of
calibration boxes.
After the calibration record is saved, the calibration box is displayed in yellow.
Step 3 Click
Save
.
5.2.2 Enabling Alarm Track
Alarm Track
is disabled by default. Smart Track is enabled only after Alarm Track is enabled
and intelligent rules of the panoramic camera.
Smart Track
is supported only when rules of
crowd map, intrusion and tripwire are triggered. See "5.8 Setting IVS" and "5.9 Setting Crowd
