26
Functions
Auto Harmony Type Selection
Master Tune
When the HARMONY button is enga-
ged, a single note on the right-hand
section of the keyboard will be heard
with additional auto harmony notes
when the auto accompaniment is
playing. There are four types of harmo
-
nies that can be selected.
Duet
adds a harmonizing note soun-
ding below the single right-hand note
that you supply when the chord accom
-
paniment is playing.
Close harmony
adds two harmonizing
notes sounding below the single right-
hand melody note that you supply
when the chord accompaniment is
playing.
Open harmony
adds several harmoni-
zing notes when the chord accompani
-
ment is playing.
Octave
adds a note one octave below
the note in the right-hand section of the
keyboard when the chord accompani
-
ment is playing.
1. Press the FUNCTION button, then the +/YES button to confirm.
2. Press the PAGE UP or the PAGE DOWN buttons until the “Harmony Type” menu appears.
3. Press the +/YES button to confirm your selection. The current harmony type will be shown.
4. Use the +/YES or –/NO buttons to select a harmony type.
5. Press the FUNCTION button again to exit the function setting mode.
The pitch of the Symphony is automatically set to standard A440 pitch when the piano is
turned on. The tuning feature makes it possible to tune the pitch of the instrument in fine
intervals. Tuning can be accomplished over a range of +/–1 semitone in +/–64 steps.
1. Press the FUNCTION button.
2. Press the PAGE UP or the PAGE DOWN buttons until the “Master Tune” menu appears.
3. Press the +/YES button to show the tuning value.
4. Use the +/YES button to increase the value or the –/NO buttons to decrease the value.
Press the +/YES, –/NO buttons simultaneously to recover the default setting of 00.
5. Press the FUNCTION button again to exit the function setting mode.
