background image

Caution

TIP

Caution

Caution

Caution

Caution

Stop

Stop

Normal

rotation

Normal

rotation

Normal rotation

Stop

Backlashing

사용 방법

손질된 재료를 준비 후, 전원플러그를 콘센트에 꽂은 다음 전원을 켜 주십시오.

● 젖은 손으로 전원플러그를 조작하지 마십시오. 

(감전, 누전, 화재의 원인이 됩니다.)

● 콘센트 상태가 올바른지 확인해 주십시오.

작동스위치의 ‘정회전’을 눌러 작동을 시작합니다.

● 정회전 : 재료를 아래로 밀어 저속압착 착즙함.

● 역회전 : 재료를 위로 되돌림.

  ※ 재료를 과다하게 투입하여 스크류가 멍추거나 열림이 불편할때

      역회전 ↔ 정지 ↔ 정회전을 2~3회 반복하여 눌러 줍니다.

사용 도중 갑자기 제품이 정지한 경우

사용 도중 갑자기 제품이 정지하면 스위치를 ‘정지’로 하고, ‘역회전’을 눌러 스크류에 막혀 있는 재료를 

위(후방)로 되돌린 후, ‘정회전’을 누르시면 됩니다.

▶ 역회전 ↔ 정지 ↔ 정회전을 2~3회 반복작동

·역회전 : 재료를 위로 되돌림. 

(역회전 스위치는 누르고 있는 상태에서만 작동함.)

·‘정회전’ 작동 중 ‘역회전’ 작동시에 ‘정지’ 스위치를 눌러 작동이 완전히 멈춘 후, 
   ‘역회전’ 스위치를 눌러 주세요 

(역회전 버튼을 ‘탁 탁 탁’ 짧게 끊어서 사용하면 더 효과적입니다.)

  (’정회전’ 작동 중 “정지” 하지 않고 ‘역회전 스위치를 누르면 고장의 원인이 될 수 있습니다.)

·그래도 작동하지 않을 경우, 원액추출용기를 분리하여 세척하신 후 사용하십시오.

깨끗이 손질한 재료를 투입구에 하나씩 넣어 주십시오.

● 착즙시, 각 재료의 특성에 맞게 손질하여 주십시오.

- 섬유질이 강한재료 :

두께 (폭) 1.5~2cm 미만, 길이 3~5cm미만

- 엽채류(샐러리, 미나리, 신선초, 케일 등)와 섬유질이 길고 질긴 재료 :

줄기부분 3~5cm 미만(신선초 1cm 미만), 입부분 돌돌 말아 착즙합니다.

단단한 씨가 들어 있는 열매는 씨를 제거하고,

동결된 재료의 씨는 작은 크기라도 완전 해동 후 사용하십시오.

● 한번에 다량 투입시, 작동이 멈출 수 있으니 한 개씩 천천히 투입하십시오.

파워 주스캡을 사용하여 혼합주스, 흐름방지, 간이세척을 할 수 있습니다.

● 파워 주스캡을 닫고 착즙하면 과일/채소는 물론 우유 등의 액체류와 콩, 바나나 등을 넣은 

혼합주스

를 

만들 수 있습니다.
● 착즙 후, 파워 주스캡을 닫으면 잔여즙 

흐름방지

가 되어 용기 이동시 편리하게 사용할 수 있습니다.

● 파워 주스캡을 닫은 상태로 물을 부어 

간이세척

하면 재료를 바꾸어 연속 착즙시 편리합니다.

● 

사과, 샐러리 등 착즙시 거품이 많이 발생되는 착즙재료는 파워 주스캡을 열고 착즙해야 거품 

발생이 적어집니다.

● 캡을 막은ㅇ 상태로 많은 양을 착즙시 

(500mL이하) 

위로 넘칠 수 있으니 주의하십시오.

원액과 섬유질이 완전히 배출되어 착즙이 끝나면 작동스위치를 ‘정지’ 하십시오.

정회전

  재료를 아래로 밀어 착즙함 / 

정지

  작동이 중단된 / 

역회전

  재료를 위로 되돌림

● 착즙 후 찌꺼기 배출이 완전히 이루어지지 않으면 뚜껑이 열리지 않을 수 있습니다.

(착즙을 마친 후, 약 30초 정도 스크류 속에 남은 섬유질을 배출해 주세요.)

이때, 뚜껑이 잘 열리지 않으면 역회전 ↔ 정지 ↔ 정지 ↔ 정회전을 2~3회 반복 후,
드럼뚜껑의 윗면을 손바닥으로 꾹 누른 상태에서 돌려서 열어주세요.

※ 재료에 따라서는 투입구에 물을 부으면서 간이 세척한 후, 뚜껑을 돌려 열어주세요.

How to use

After preparing the ingredients, plug the power plug into the outlet.

● Do not touch the power plug with wet hands.

    

(Can cause electrical shock, short-circuiting or fire.)

● Check the status of electrical outlet.

Press the ‘forward’ switch to start the operation.

● Forward : Push down the ingredients to squeeze the juice.

● Reverse : bring the ingredients up.

  ※ When too much ingredients were added so the screw stopped or 

      if it is hard to open (Press Reverse ↔ Stop ↔ Forward for 2-3 times.)

If the product stopped during the use

Press the ‘Stop’ switch, then ‘Reverse’ to pull out any ingredients stuck on screw, 

then press ‘Forward’.

▶ Press Reverse ↔ Stop ↔ Forward for 2-3 times

·Reverse : Pull out the ingredients. 

(Only works when Reverse switch is pressed.)

·During ‘Forward’ operation, press ‘Stop’ switch and ‘Reverse’, 
   

(If Reverse button are pressed briefly but repeatedly, then it is better.)

  (If you press ‘Reverse’ switch during ‘Forward’ operation without pressing “Stop” button, 
  then it may break the machine.)

·If it doesn’t work, remove the juice container and wash it.

Enter clean ingredients one a time.

● Cut the ingredients for juicing.
- Strong fibrous ingredients :

Thickness (width) less than 1.5~2cm, Length less than 3~5cm

- Long and tough fibrous ingredients like leafy vegetables 

(celery, parsley, angelica keiskei, kale, etc.) :

roll up the 3~5cm of the stem (less than 1cm for angelica keiskei) for juicing.

For the fruits with hard seeds, 

remove the seeds first and thaw the frozen small sized seed before use.

● Insert one piece at a time as excessive ingredients may stop the operation of the 

machine.

Use the power juice cap for mixing juices to prevent flow and for easy cleaning.

● Close the power juice cap and add fruits/vegetables and liquid to make 

mixed drinks

.

● After juicing, close the power juice cap to 

prevent the flow

 and this makes it easy to 

carry.
● Close the power juice cap and pour in the water for 

easy cleaning

.

● 

For ingredients such as apple, celery, etc. that makes too much bubbles, open the 

power juice cap and the amount of bubble will decrease.

● If the cap is closed but there are too much juice (

less than 500mL

), then it may 

overflow so please be careful.

Once the juice and fiber is fully discharged, ‘stop’ the power button.

Forward

  push down the ingredients / 

Stop 

 stop the operation / 

Reverse

  pull up the ingredients

● If all residues are not discharged, then the lid may not open.

(After juicing, let the fiber discharge from the screw for 30 seconds.)

If the lid doesn’t open, press Reverse ↔ Stop ↔ Stop ↔ Forward for 2-3 times and 
press the top of drum lid firmly and rotate to open.

※ Based on the ingredient, you can pour in the water for simple cleaning and 
then open the lid.

Summary of Contents for GJ-110









Reviews: