GB1200 User Manual
- -
12
is lower.
Non-stopping time is more
than 10s.
1. Power supply is loose
contact.
2. Disturb.
1. Check outer power circuitry
or replace power supply.
2. Shut down and start again.
Balancing inaccurately and do
not up to 00
1. Sensor is affected
with damp.
2. Main board goes
wrong.
3. Program is
disordered.
1. Adjust again, drying it and
self-calibrate.
2. Replace main board.
3. Self-calibrate over again.
Display value but not brake. 1. Brake system is
damaged.
2. External disturbes.
1. Replace power panel.
2. Start over again.
Twice dismounting error is
more than 10g.
1. The inner hole of
wheel is not regular.
2. Adapter is installed
improperly.
1. Replace the wheel.
2. Check the assembly surface
over again.
Self-calibration
displays
Err8. 1. Power panel goes
wrong.
2. Lead wire of sensor
fall back.
1. Replace wheel and try again.
2. Connect it.
Display error value of several
hundred grams
1. Three memory
parameters are
disordered.
2. Tire error is much
greater.
3. Main board goes
wrong.
1. Input over again.
2. Replace a tire.
3. Replace main board.
6. Structure of pressure sensor and steps of adjustment
During the transportation or operation process, pressure sensors are affected with damp,
which results in balancing the tire inaccurately. Then drying pressure sensors. Operate the
machine after calibrating.
