9
SYSTEM PROGRAMMING
(A) PROGRAMMING PASSWORD:
Dial 1# + password (Initial Password is 6336).
If password is right then confirmation tone else NU tone
Now you can dial codes as given below
(B) TO PROGRAM DEFAULT SETTINGS:
191
(C) TO PROGRAM GLOBAL MEMORY DIALING:
Location number (100 to 109) + Telephone #
(D) TO CHANGE SYSTEM PASSWORD:
2 + New Pa New Password (4 digit)
(E) TO PROGRAM INCOMING CALL LANDING
Day Mode :
3 + No. of Rings (3/4/5) + Extn Nos (Maximum 4 Extns)
Night Mode:
4 + Extn Nos (Maximum 4 Extns)
(F) TO PROGRAM DAY & NIGHT CLASS OF SERVICE (COS):
6 + Extn No + Day COS + Night COS
COS : 0 - Only Intercom
1 - Local Calls
2 - Local + Mobile
3 - STD
4 - All allowed
5 - Extn default setting
(G) TO PROGRAM EXTENSION FEAUTRES:
7 + Extn No.+ 0 = Flash timing (600 msec)
1 = Flash timing (300 msec)
2 = Disable Extn CLI
3 = Enable Extn CLI
4 = Trunk Unlimited
5 = Trunk 5 mins
6 = Barge in protect Enable
7 = Barge in protect Disable
