31
Systemic Time Setting
Press the
button to display the set time. Program the clock by pressing the
button. The
display will show a digital clock with the hour setting flashing, use the up and down buttons for the
correct hour, pressing
save the changes. Next, the minutes setting will flash. Again, use the up
and down buttons, pressing
to save changes. The time setting is now complete.
Note, the time displayed is in 12-hour clock mode, with AM and PM to identify. Ensure not
to leave more than five seconds between setting the time, as the time setting will be exited
without saving changes.
Filtration Cycle Setting
+
If using
Galaxy’s Water Start Up Care Kit, set your filter cycles to two sets of four-hour
filtering.
+
If you are using
simplesilver™, set your filter cycles to two sets of six-hour filtering.
After setting the time, press
FILTER 1 and START TIME will appear on the screen. Select the
hour by pressing the up and down buttons to set the start time for the first filter cycle. Press
again to set the end time.
Repeat this process for FILTER 2, your second filtration cycle.
+
If no activity occurs for five seconds during setting the filtration cycle, the touchpad will exist the
screen without saving the changes and you will need to restart.
+
The filtration cycle will only run when the spa is in standby mode. When this occurs the control
panel will display “O3”. When the spa is in power on mode, the filtration function will stop.
+
If you set both filtration cycles to the same time, only one filtration cycle will run.
Mode Setting, Light Settings, Jets / Blower, Troubleshooting.
For information on the above functions and general troubleshooting, please click this
to download our SpaTech guide. Otherwise, if you have printed this guide, please visit
to view the full document online.
Diverters
Although you will use the touchpad to turn the jets on and off, diverters allow you to customise
the massage pressure from seat to seat, diverting water between the spa jets. The diverter
controls are located on the edges of your spa and look like this:
INCREASE
DECREASE
