User Manual
Menu Operations
32
11.8.4 Backup to USB
In this menu, you can dump the software to the USB
equipment
1)
In "Backup file”, you can press [OK] key to edit the
file name; there will pop a dialogue for you to enter
to the new file name, Press [up /down ] key in File
path to select partition or drives;
2)
In "Backup to USB", you can press [OK] key to
start backup software.
3)
In this menu, you can press “0000” key to display
“backup channel list” item. If you select this item,
you can see default DB.bin and defaultFAV.bin file
in root directory of the USB storage.
11.9 Default Setting
When you enter
to “Default Setting” menu, there will pop
a dialogue for you to enter to the password, and the
default password is “0000”, after you input the correct
password, you will see a screen like below:
11.9.1 Default all Value:
In Default All Value Menus like below:
When you press [OK] key in the “Default Setting”
item:
1)
There will show a warning message to inquiry you
“This operation will load default and erase all the
channels that user added, continue?”
2)
If you select “Yes” option, the all revised
parameters of the receiver will reset to default
value. Please carefully to using this function.
3)
In step 1 and step 2, press [Exit] key
or select “no”
option, can draw back from this item and without
saving.
11.9.2 Delete Channel by SAT:
In Delete Channel by SAT Menu like below:
When you press [OK] key in the “Delete channel by
SAT
” item, it will show all satellites which already
scan channels, you can press [ok] or [green] key and
[up / down] key to select satellite, then press [yellow]
key while the delete function, it will pop a warning
dialogue to inquiry you “Do you want to delete
channels by satellite”. If you select “Yes” item, the all
channel will be deleted by select satellite.
