User Manual
Menu Operations
28
11.3.5 Preferred Storage
If you connect more than one USB disks or the USB disk
has multi-partition, you can use this menu to change the
default storage, the default storage is the first partition.
11.3.6 Network Proxy
11.4 Local Time Setting
When you enter to “Local Time Setting” menu, you will
see the screen like below:
1.
GMT Usage: This item is use for open the usage of
GMT. You can press [Up / Down] keys to switch
“SAT, NTP or manual”, “SAT” means time from the
satellite, “NTP” means time from the network.
2.
The “GMT Offset” item is valid only when the
setting of “GMT Usage” is “SAT” or NTP. You can
press [OK] and
[Up / Down] keys to switch “GMT
Offset” value and the range is “-12:00 ~ +12:00”,
increase each half hour progressively.
3.
You can press [OK] and [Up / Down] keys to
control Summer time on or off.
4.
“Date” and “Time” items are valid only when the
setting of “GMT Usage” is “manual”. You can press
[left /right] keys to moving cursor and use number
keys to input directly or [up / down] keys change
numbers.
If the current channel provides the correct time
information, you will see the current time while you
enter “Time” menu. If the channel doesn’t provide
time information, you have to input the date and
time information manually.
5.
Press [Menu
] key to draw back from “Local Time
Setting
” Menu.
11.5 Timer
You can press [OK] key to open timer menu. You will
see the screen like below:
1.
Timer list: You can press [Up / Down] keys to
select Timer event, there are 27 timer events in
total.
2.
If you have added some timer events, but you want
to delete them, you can press [red] key to delete all
timer events, or press [green] key to delete timer
event one by one.
3.
Press [yellow] key or [OK] key to edit timer event.
Current time information will display on the right
corner; if the current time is incorrect, please
modify
the time information in “Time” item.
